Pimoronie Verzeichnis gelöscht.
This commit is contained in:
@@ -1,3 +0,0 @@
|
|||||||
<EFBFBD>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>&<26>'<27>&<26>
|
|
||||||
dtparam=spi=off
|
|
||||||
dtparam=i2c_arm=on
|
|
@@ -1,25 +0,0 @@
|
|||||||
#!/usr/bin/env python
|
|
||||||
|
|
||||||
import time
|
|
||||||
try:
|
|
||||||
from smbus2 import SMBus
|
|
||||||
except ImportError:
|
|
||||||
from smbus import SMBus
|
|
||||||
from bme280 import BME280
|
|
||||||
|
|
||||||
print("""all-values.py - Read temperature, pressure, and humidity
|
|
||||||
|
|
||||||
Press Ctrl+C to exit!
|
|
||||||
|
|
||||||
""")
|
|
||||||
|
|
||||||
# Initialise the BME280
|
|
||||||
bus = SMBus(1)
|
|
||||||
bme280 = BME280(i2c_dev=bus)
|
|
||||||
|
|
||||||
while True:
|
|
||||||
temperature = bme280.get_temperature()
|
|
||||||
pressure = bme280.get_pressure()
|
|
||||||
humidity = bme280.get_humidity()
|
|
||||||
print('{:05.2f}*C {:05.2f}hPa {:05.2f}%'.format(temperature, pressure, humidity))
|
|
||||||
time.sleep(1)
|
|
@@ -1,49 +0,0 @@
|
|||||||
#!/usr/bin/env python
|
|
||||||
|
|
||||||
import time
|
|
||||||
from bme280 import BME280
|
|
||||||
from subprocess import PIPE, Popen
|
|
||||||
|
|
||||||
try:
|
|
||||||
from smbus2 import SMBus
|
|
||||||
except ImportError:
|
|
||||||
from smbus import SMBus
|
|
||||||
|
|
||||||
print("""compensated-temperature.py - Use the CPU temperature to compensate temperature
|
|
||||||
readings from the BME280 sensor. Method adapted from Initial State's Enviro pHAT
|
|
||||||
review: https://medium.com/@InitialState/tutorial-review-enviro-phat-for-raspberry-pi-4cd6d8c63441
|
|
||||||
|
|
||||||
Press Ctrl+C to exit!
|
|
||||||
|
|
||||||
""")
|
|
||||||
|
|
||||||
# Initialise the BME280
|
|
||||||
bus = SMBus(1)
|
|
||||||
bme280 = BME280(i2c_dev=bus)
|
|
||||||
|
|
||||||
# Gets the CPU temperature in degrees C
|
|
||||||
def get_cpu_temperature():
|
|
||||||
process = Popen(['vcgencmd', 'measure_temp'], stdout=PIPE)
|
|
||||||
output, _error = process.communicate()
|
|
||||||
output = output.decode()
|
|
||||||
return float(output[output.index('=') + 1:output.rindex("'")])
|
|
||||||
|
|
||||||
factor = 0.6 # Smaller numbers adjust temp down, vice versa
|
|
||||||
smooth_size = 10 # Dampens jitter due to rapid CPU temp changes
|
|
||||||
|
|
||||||
cpu_temps = []
|
|
||||||
|
|
||||||
while True:
|
|
||||||
cpu_temp = get_cpu_temperature()
|
|
||||||
cpu_temps.append(cpu_temp)
|
|
||||||
|
|
||||||
if len(cpu_temps) > smooth_size:
|
|
||||||
cpu_temps = cpu_temps[1:]
|
|
||||||
|
|
||||||
smoothed_cpu_temp = sum(cpu_temps) / float(len(cpu_temps))
|
|
||||||
raw_temp = bme280.get_temperature()
|
|
||||||
comp_temp = raw_temp - ((smoothed_cpu_temp - raw_temp) / factor)
|
|
||||||
|
|
||||||
print("Compensated temperature: {:05.2f} *C".format(comp_temp))
|
|
||||||
|
|
||||||
time.sleep(1.0)
|
|
@@ -1,22 +0,0 @@
|
|||||||
#!/usr/bin/env python
|
|
||||||
|
|
||||||
try:
|
|
||||||
from smbus2 import SMBus
|
|
||||||
except ImportError:
|
|
||||||
from smbus import SMBus
|
|
||||||
from bme280 import BME280
|
|
||||||
|
|
||||||
print("""dump-calibration.py - Dumps calibration data.
|
|
||||||
|
|
||||||
Press Ctrl+C to exit!
|
|
||||||
|
|
||||||
""")
|
|
||||||
|
|
||||||
# Initialise the BME280
|
|
||||||
bme280 = BME280(i2c_dev=SMBus(1))
|
|
||||||
bme280.setup()
|
|
||||||
|
|
||||||
for key in dir(bme280.calibration):
|
|
||||||
if key.startswith('dig_'):
|
|
||||||
value = getattr(bme280.calibration, key)
|
|
||||||
print('{} = {}'.format(key, value))
|
|
@@ -1,39 +0,0 @@
|
|||||||
#!/usr/bin/env python
|
|
||||||
|
|
||||||
import time
|
|
||||||
|
|
||||||
try:
|
|
||||||
from smbus2 import SMBus
|
|
||||||
except ImportError:
|
|
||||||
from smbus import SMBus
|
|
||||||
from bme280 import BME280
|
|
||||||
|
|
||||||
print("""local_altitude.py -
|
|
||||||
Allows you to correct the QNH for your local area.
|
|
||||||
Do not rely on this approximation for landing planes.
|
|
||||||
Press Ctrl+C to exit!
|
|
||||||
""")
|
|
||||||
|
|
||||||
# Initialise the BME280
|
|
||||||
bus = SMBus(1)
|
|
||||||
bme280 = BME280(i2c_dev=bus)
|
|
||||||
|
|
||||||
# asks the user for their local QNH value and confirms it
|
|
||||||
local_qnh = input("""Please enter your local QNH value.
|
|
||||||
You can find this by searching for a local METAR on the internet.
|
|
||||||
>""")
|
|
||||||
print("You have told us the QNH is", local_qnh)
|
|
||||||
|
|
||||||
# converts the input into a floating point number
|
|
||||||
local_qnh = float(local_qnh)
|
|
||||||
time.sleep(1)
|
|
||||||
|
|
||||||
# workaround to get rid of the first reading
|
|
||||||
altitude = bme280.get_altitude()
|
|
||||||
print("Waiting a couple of seconds for the sensor to initialise...")
|
|
||||||
time.sleep(2)
|
|
||||||
|
|
||||||
while True:
|
|
||||||
altitude = bme280.get_altitude(qnh=local_qnh)
|
|
||||||
print(round(altitude), "metres above sea level")
|
|
||||||
time.sleep(2)
|
|
@@ -1,38 +0,0 @@
|
|||||||
#!/usr/bin/env python
|
|
||||||
|
|
||||||
import time
|
|
||||||
|
|
||||||
try:
|
|
||||||
from smbus2 import SMBus
|
|
||||||
except ImportError:
|
|
||||||
from smbus import SMBus
|
|
||||||
from bme280 import BME280
|
|
||||||
|
|
||||||
print("""relative-altitude.py - Calculates relative altitude from pressure.
|
|
||||||
|
|
||||||
Press Ctrl+C to exit!
|
|
||||||
|
|
||||||
""")
|
|
||||||
|
|
||||||
# Initialise the BME280
|
|
||||||
bus = SMBus(1)
|
|
||||||
bme280 = BME280(i2c_dev=bus)
|
|
||||||
|
|
||||||
baseline_values = []
|
|
||||||
baseline_size = 100
|
|
||||||
|
|
||||||
print("Collecting baseline values for {:d} seconds. Do not move the sensor!\n".format(baseline_size))
|
|
||||||
|
|
||||||
# Collect some values to calculate a baseline pressure
|
|
||||||
for i in range(baseline_size):
|
|
||||||
pressure = bme280.get_pressure()
|
|
||||||
baseline_values.append(pressure)
|
|
||||||
time.sleep(1)
|
|
||||||
|
|
||||||
# Calculate average baseline
|
|
||||||
baseline = sum(baseline_values[:-25]) / len(baseline_values[:-25])
|
|
||||||
|
|
||||||
while True:
|
|
||||||
altitude = bme280.get_altitude(qnh=baseline)
|
|
||||||
print('Relative altitude: {:05.2f} metres'.format(altitude))
|
|
||||||
time.sleep(1)
|
|
@@ -1,33 +0,0 @@
|
|||||||
#!/usr/bin/env python
|
|
||||||
|
|
||||||
import time
|
|
||||||
try:
|
|
||||||
from smbus2 import SMBus
|
|
||||||
except ImportError:
|
|
||||||
from smbus import SMBus
|
|
||||||
from bme280 import BME280
|
|
||||||
|
|
||||||
print("""temperature-compare.py - Compares oversampling levels
|
|
||||||
(requires two BME280s with different addresses).
|
|
||||||
|
|
||||||
Press Ctrl+C to exit!
|
|
||||||
|
|
||||||
""")
|
|
||||||
|
|
||||||
# Initialise the BME280
|
|
||||||
bus = SMBus(1)
|
|
||||||
bme280A = BME280(i2c_dev=bus)
|
|
||||||
bme280B = BME280(i2c_dev=bus, i2c_addr=0x77)
|
|
||||||
|
|
||||||
# Set up in "forced" mode
|
|
||||||
# In this mode `get_temperature` and `get_pressure` will trigger
|
|
||||||
# a new reading and wait for the result.
|
|
||||||
# The chip will return to sleep mode when finished.
|
|
||||||
bme280A.setup(mode="normal", temperature_oversampling=1, pressure_oversampling=1)
|
|
||||||
bme280B.setup(mode="normal", temperature_oversampling=16, pressure_oversampling=16)
|
|
||||||
|
|
||||||
while True:
|
|
||||||
temperatureA = bme280A.get_temperature()
|
|
||||||
temperatureB = bme280B.get_temperature()
|
|
||||||
print('Forced: {:05.2f}*C Normal: {:05.2f}*C D: {:05.2f}'.format(temperatureA, temperatureB, abs(temperatureA - temperatureB)))
|
|
||||||
time.sleep(1)
|
|
@@ -1,23 +0,0 @@
|
|||||||
#!/usr/bin/env python
|
|
||||||
|
|
||||||
import time
|
|
||||||
try:
|
|
||||||
from smbus2 import SMBus
|
|
||||||
except ImportError:
|
|
||||||
from smbus import SMBus
|
|
||||||
from bme280 import BME280
|
|
||||||
|
|
||||||
# Initialise the BME280
|
|
||||||
bus = SMBus(1)
|
|
||||||
bme280 = BME280(i2c_dev=bus)
|
|
||||||
|
|
||||||
# Set up in "forced" mode
|
|
||||||
# In this mode `get_temperature` and `get_pressure` will trigger
|
|
||||||
# a new reading and wait for the result.
|
|
||||||
# The chip will return to sleep mode when finished.
|
|
||||||
bme280.setup(mode="forced")
|
|
||||||
|
|
||||||
while True:
|
|
||||||
temperature = bme280.get_temperature()
|
|
||||||
print('{:05.2f}*C'.format(temperature))
|
|
||||||
time.sleep(1)
|
|
@@ -1,7 +0,0 @@
|
|||||||
printf "It's recommended you run these steps manually.\n"
|
|
||||||
printf "If you want to run the full script, open it in\n"
|
|
||||||
printf "an editor and remove 'exit 1' from below.\n"
|
|
||||||
exit 1
|
|
||||||
/usr/bin/python3 -m pip uninstall pimoroni-bme280
|
|
||||||
cp /home/pi/Pimoroni/config-backups/config.preinstall-pimoroni-bme280-2022-07-22-06-35-49.txt /boot/config.txt
|
|
||||||
rm -r /home/pi/Pimoroni/pimoroni-bme280
|
|
Reference in New Issue
Block a user